null
lock plus

Mermaid Family , Mother and Daughter of the Ocean, Beach Outdoor living area decor, Quality Haitian Craftsmanship 34" x 17"

Haiti
$98.00

Mermaid Family , Mother and Daughter of the Ocean Haitian Fine Art 34" x 17"

  • Though it is protected with a weather-proof finish, this sculpture will rust over time, if exposed to outdoor weather. To prevent this from happening, grab a can of spray on enamel at the hardware store and go to it. Once a year should be plenty. It's a snap!
  • A few nails and a hammer are all you'll need to hang your sculpture. Look for a place where the design is joined or notched and put the first nail there. Use a second and possibly a third nail, if the piece is large, in other joined or notched design elements within the sculpture to straighten and secure it to the wall. Make sure that you avoid placing a nail into an eye or mouth, as that will draw attention to the nail. You want the nails to "disappear" into the piece.
  • Through fair trade practices, Evenson Thenor was able to rebuild his home and his life following the 2010 earthquake.
  • Each unique fair trade metal sculpture is hand- cut from recycled 55- gallon steel drums. To begin the process, both ends of the drum are removed and placed inside of the remaining cylinder, along with scrap paper and dried banana or sugar cane leaves. Next, the contents are set ablaze to burn off any paint or residue and strengthen the metal. When cooled, the drums are sliced down the side and flattened, effectively creating a "steel canvas" of approximately 3' x 6', upon which the design is drawn. Using a hammer, chisel and various other primitive tools, the desired image is cut out and decorative patterns are pounded into the metal. Finally, a weather-proof finish coating is applied, making these fascinating pieces of folk art perfect for displaying indoors or out.

It's Cactus Metal Art Haiti

Read more
Add to wishlist

Description

Mermaid Family , Mother and Daughter of the Ocean Haitian Fine Art 34" x 17"

  • Though it is protected with a weather-proof finish, this sculpture will rust over time, if exposed to outdoor weather. To prevent this from happening, grab a can of spray on enamel at the hardware store and go to it. Once a year should be plenty. It's a snap!
  • A few nails and a hammer are all you'll need to hang your sculpture. Look for a place where the design is joined or notched and put the first nail there. Use a second and possibly a third nail, if the piece is large, in other joined or notched design elements within the sculpture to straighten and secure it to the wall. Make sure that you avoid placing a nail into an eye or mouth, as that will draw attention to the nail. You want the nails to "disappear" into the piece.
  • Through fair trade practices, Evenson Thenor was able to rebuild his home and his life following the 2010 earthquake.
  • Each unique fair trade metal sculpture is hand- cut from recycled 55- gallon steel drums. To begin the process, both ends of the drum are removed and placed inside of the remaining cylinder, along with scrap paper and dried banana or sugar cane leaves. Next, the contents are set ablaze to burn off any paint or residue and strengthen the metal. When cooled, the drums are sliced down the side and flattened, effectively creating a "steel canvas" of approximately 3' x 6', upon which the design is drawn. Using a hammer, chisel and various other primitive tools, the desired image is cut out and decorative patterns are pounded into the metal. Finally, a weather-proof finish coating is applied, making these fascinating pieces of folk art perfect for displaying indoors or out.

It's Cactus Metal Art Haiti

Artist Bio

Additional info

SKU: rec274
Availability: 34" x 17"
Width: 18.00
Height: 34.00
Depth: 1.00
Warranty: 28